|
|
|
| This tutorial is on the basics of Fisherman. To start, you should be made aware that Fisherman will not work on an open tank. Close your tanks before attempting to work on them. Aquazone does not need to be running at all in order for you to use Fisherman. | |
| WATER SETTINGS | |
|
|
Note the small
box at bottom right. To work on the water settings in your tank, this
box must be checked. In the left panel, locate the folder which contains the tank you want to work on and double click on it. Once this folder is selected, the tanks in that folder will appear in the right panel. |
 |
Double click on the tank you want to clean and a box will appear titled "Water Settings". You can change the volume of water that AZ *thinks* you have in the tank by checking the box for "Vol Change" and entering the desired number of liters. More water means the water will need to be cleaned less often. 200 Liters is plenty. Note: This will not change the actual size of your tank. To change your water settings to the desired levels, click the "init" button. After doing this, you can change any level manually by typing in the number you want. This is needed for some fish. After all the settings are where they should be, click the "Update" button. That tank is done and the box will close. |
|
Continue |
|
|
|
|
